Walnut / Media Blasting

Walnut/Media Blasting Rugeley - MB MOTORS

MB MOTORS is an experienced provider of walnut and media blasting services for all sorts of engines. This innovative cleaning process can maximise engine performance by removing carbon deposits that clog up the intake valves. It’s the ideal solution to get better fuel efficiency, more power and a healthier/longer-lasting engine. 


Book online 

What is Walnut/Media Blasting?

Walnut blasting and media blasting are two types of similar engine cleaning techniques that are designed to get rid of hardened and crusted materials clinging to engine components. Both are commonly used to remove carbon build-up, and they’re the most efficient ways of cleaning engines without damaging any crucial parts. 

  • Walnut Blasting involves crushed walnut shells that are blasted onto the engine’s surface using a high degree of pressure. The abrasiveness of the walnut shells helps to blast away even the most stubborn carbon deposits, while the shells themselves are soft enough to avoid scratching the engine. 
  • Media Blasting follows the same concept, only it uses different types of abrasive media. At MB MOTORS, we will often use glass beads or plastic for media blasting, and this is the preferred method when walnut blasting is unable to remove all of the carbon deposits. 
Car MOT Rugeley
Vehicle Servicing Rugeley

Why You Should Care About Walnut & Media Blasting

Over time, an engine can be filled with carbon deposits, which happens when the fuel inside an engine doesn’t combust properly. Fuel should burn as it moves through the engine, but sometimes it doesn’t burn completely. This creates various byproducts that stick to the valves and other internal parts of the engine - and carbon is the most notable of these. 

When carbon deposits aren’t removed from the engine, they solidify and clog it up. Excess carbon build-up will likely lead to the following problems: 

  • Restricted airflow through the engine, meaning the engine demands more fuel and reduces fuel economy. 
  • A lack of acceleration and power due to the engines' restricted airflow. 
  • Engine misfires and rough idling. If left unchecked can cause long-term engine problems. 

The consequence of these problems will mean your car costs more money to run. Poor fuel efficiency leads to frequent stops at the local petrol station, while misfiring and rough idling will wear down your engine and could result in costly repairs. 

Walnut and media blasting can prevent all of these problems by helping you clean your engine and remove any nasty carbon buildup. The results are instantaneous, and professional media or walnut blasting from MB MOTORS will: 

  • Restore engine performance
  • Reduce fuel consumption & improve efficiency
  • Reduce engine knocking and misfires
  • Improve engine lifespan
  • Lead to a more responsive driving experience

Our Professional Walnut & Media Blasting Process

We take walnut blasting and media blasting seriously, which is why we’ve devised an expert process at our state-of-the-art workshop to ensure your vehicle gets the best treatment. 

Step 1: A Thorough Engine Inspection

Using dealership-quality diagnostics tools and the latest equipment, we carry out a thorough engine inspection to determine the extent of any carbon build-up. This helps us see where most of the carbon deposits lie and create a plan based on how serious things are. 

Step 2: Walnut Blasting Intake Valves

Our next step involves walnut blasting your engine’s intake valves. These are usually where a lot of carbon deposits end up, and the crushed walnut shells are perfect for getting rid of them. Your engine will now have a much better intake system without clogged airways, allowing for far improved air circulation - which means more power and efficiency! 

In some cases, after our initial inspection, we discover that your engine will only need walnut blasting on the intake valves. This happens when there isn’t too much carbon build-up, so you won’t need the third step. 

Step 3: Media Blasting

In other cases, carbon deposits have made their way into other engine components. Consequently, we use media blasting to get to these harder-to-reach areas, or areas that require slightly more abrasive cleaning. 

Step 4: Post-Blasting Testing

Our service ends with extensive engine testing using our diagnostics system to make sure your engine now runs smoothly. If we still notice slight

Why Choose Us For Walnut & Media Blasting in Rugeley?

We’ve established ourselves as one of the highest-rated garages in the area by quite some distance, and this is down to the comprehensive services we provide to all of our customers. Choosing us for walnut or media blasting is the right decision because we offer: 

  • The most experienced technicians with years of experience
  • Access to all of the latest walnut/media blasting equipment for better engine cleaning
  • Custom blasting solutions that are tailored to your vehicle’s specific requirements
  • A full-service approach that includes engine inspections and testing
  • Highly competitive pricing to help you maintain your vehicle without overcharging

Book online today and we’ll get your vehicle into our workshop at the earliest possible time. You’ll soon be driving away with a much healthier engine that’s free from carbon deposits and feels as good as new.  

Frequently Asked Questions

When Does My Engine Need Walnut/Media Blasting?

Most engines over 50,000 miles will benefit from walnut or media blasting as they’re likely to have large amounts of carbon build-up. Likewise, if you spot dips in fuel performance or your engine is always idling and struggling to accelerate, then you may benefit from booking this service.

Is Walnut/Media Blasting Safe For My Engine?

Yes, both media and walnut blasting are completely safe for your engine. They’re designed to be abrasive enough to remove stubborn carbon deposits without being overly aggressive enough to damage an engine’s components.

Is Walnut/Media Blasting Suitable For My Engine?

Walnut blasting is suitable for a lot of engines, though it’s mainly used to clean direct injection engines. Older engines with a different intake design might not be suitable for this service - it’s worth contacting us and telling our team about your engine so we can explain if walnut blasting will be suitable or not.

Book Your MOT, Service or Repairs in Rugeley Today

Call us on 01889 882488 or fill out the form below to book your next MOT, car service, or repair and we'll get back to you as soon as we can!